Air molding equipment and air molding machine designed to produce blister packaging and disposable dishes.
In the air forming machine for processing products used compressed air under pressure 0.3-0.5 MPa, which comes between the film clips and lid.
In the vacuum molding machines used by the air, which provides a maximum discharge pressure of the product more than 0.09 MPa. Air molding equipment and better tehnologichno.
To pre-forming complex products on air molding machines do not need heated to the critical state of the film (as in vacuum forming equipment). High pressure air reduces the temperature of forming films, which in turn reduces the time required for heating and cooling.
Air molding machine PFL-1/600
Air automatic molding
PFL-1/600 line.
Processes of forming, and the filing of heating tapes, as well as trim its part otformovannoy go in the automatic mode. Felling of finished products produced at the press VPT-1 rolling.
Air molding machine PFL-1/600 technical possibilities:
possibility of using cheaper forms for the vacuum forming equipment.
Air cooling forms.
tight overall camera that allows the dome to produce filler, to reduce the difference between the wall thickness of the product.
Adjustable zonny heat billets with diskretnostyu 160 mm, which allows fields to seek optimum temperature polymer sheet.
Automatic operation mode.
opportunity to air compartments with various molding and optimization of the width of spaces used by the film.
Automatic adjustable power zone heaters.
Automatic stretch otformovannoy part of the film.
Air PFL-1/600 molding equipment, technical characteristics:
Setup Type: Universal automatic air molding line PFL-1/600 products for the manufacture of pneumatic method of film forming materials.
The size of the surface forming air forming linii- 600 160x600 mm
Depth-forming 220 mm
Progress molding table-280 mm
The maximum height of the product is 220 mm
The material used Thermo-plastic film materials 0,1-1,0 mm thick.
Dimensions (mm) machine: the length of 2100 mm 1800 mm in width the height of 1600 mm
Electrical voltage: 3 F x 380 Volt, the working moschnost- 8 KW, maximum power is 16 kW; The number of heating zones adjustment - 16. compressed air 5-6 atm. , the cost of 400 l / min.
Cooling air-molded products Forms-air cooling. (a centrifugal fan, a capacity of 3000 m3 / hr.)
Heating elements are controlled by electronic phase power regulators.
Camera-forming Sealed, with the possibility of forming products with a preliminary refilling dome.
Productivity (0.3 mm film PVC) - 5 cycle / min (0.5 mm film PVC), 3-cycle / min
Operating pressure in the manufacture of products: 0.35 MPa
They come with: compressor C - 415-2 pcs the centrifugal fan FUK-3000-1 pc.
Lifetime warranty air-forming line 2 years.
The cost of air forming lines PFL-1/600 - 580000 rubles.
The cost of rolling press-120000 rubles.
Prices are given in the light of VAT.
PFL-2/600
We propose a new automatic line for production of packaging for cakes.
