, , , , ,
, -
Toilet cabins, Biotoilets, Septic tanks, Acryl baths and acrylic liners

The vacuum molding machines and lines

The vacuum molding equipment produced by constantly improving our enterprise. This is due to the growth of production and increased competition in our country. The effect of this is to increase the quality of products and the productivity of equipment. As a result, our vacuum molding machines to its possibilities reached, and on certain parameters exceeded the level of foreign analogues.

Depending on the performance of equipment, vacuum forming machine in our company is assigned its own unique markings which reflect these parameters.

Type the following markings: A IMF. In. C (W), where the parameter is the length harvesting A, option B, the width of harvesting, S-parameter during drapiruyuschego table. The parameter W indicates the presence of the lower heating panels for heating bilateral harvesting.
Field forming a vacuum forming machine, minus nip harvesting approximately equal to:
(A-40 mm) x (B-40 mm). Depth (height) forming is: S-50 mm.

This page presented to the evolutionary path of development vacuum molding equipment company Magistral, as well as the main characteristics.

The vacuum forming machine VFM W 2000.2000.1000.

To reduce the dimensions of the equipment complied with the special scheme tyanuschimi air rams drive drapiruyuschego table. This scheme allows stocks decongest air cylinders of bending loads and reduce the height vakuum-formovochnoy machine. VFM total height of only 2.5 meters. Progress table drapiruyuschego 1000 mm.
This equipment is on site operator remote control panel with indication of the intensity of heating zones.
The machine is equipped with an optical sensor automatic protection against provisaniya hot billets.
More about the scheme compact vacuum forming equipment, large vacuum molding machine
Recent technological innovations:

  • heavy, with a small table during the height dimension VFM,
  • control and automatic correction shear harvesting,
  • dome-inflation pressure fan,
  • Takeout management-heating zones to the central console

spent on previous models and sold in 2000 VFM h2000h1000 W, revealed at the bottom additional heating equipment for bilateral panel heating harvesting.

the vacuum forming machine the vacuum forming machine

The vacuum molding equipment in 2006

The vacuum forming machine VFM 3000.2000.1350.

The vacuum forming machine VFM 3000.2000.1350.

TFM type-2

Air molding production line for blister packaging

Air molding production line for blister packaging.

TFM type-1

The vacuum forming machine 1600.1600.550 VFM.

The vacuum forming machine 1600.1600.550 VFM.

TFM type-2

All vacuum molding equipment in our company is made to order in accordance with the terms of the Customer, which necessarily reflect:

  • size fields forming a vacuum forming machine during the table
  • or maximum drapiruyuschego the height (depth) forming a vacuum forming machine

Other important parameters vacuum molding equipment. Assignments may contain technical information about the product, which is acquired for the production of this vacuum molding equipment (dimensions, wall thickness, the type of plastic), completeness of delivery. Assignments Technical Parameters used for in the calculation of the cost of vacuum forming equipment.

Our specialization is the production of vacuum molding machines with varying levels of forming, as well as air and vacuum molding lines.

All equipment before submitting the Employer being tested in obtaining quality samples plastics products.

The vacuum molding equipment in 2005

 The vacuum forming machine 2000.2000.750 VFM 2000.

The vacuum forming machine 2000.2000.750 VFM 2000.

TFM type-2

The vacuum molding production line for blister packaging.

The vacuum molding production line for blister packaging.

TFM type-1

The vacuum forming machine VFM 1300.900.350.

The vacuum forming machine VFM 1300.900.350.

TFM type-1

Our company has accumulated a lot of experience designing and manufacturing of vacuum forming, Thermo molding equipment. The design of the vacuum molding machines optimized production by the largest possible range of plastic products that achieved following the availability of necessary technological capabilities vacuum forming:

  1. Heating semis at the vacuum forming machine produced examined infrared heater with a smooth adjustable power thyristor. All field forming divided into zones mmh180mm 180, within the boundaries of which individually selected intensity to achieve optimal heating temperature fields harvesting.
  2. The vacuum forming machine equipped with a mechanism of support hot sheet horizontal nip. This allows withstand equal distance between the heater and the workpiece zone, avoid contact with the form.
  3. The vacuum molding machinery equipment staffed reduce discrete fields forming.
  4. Wedge harvesting and drive traffic pressure vacuum forming machine frame by two air rams with a force of 500 kg / MT nip. Nip common type of harvesting in most similar vacuum molding machines from other manufacturers-ekstsentrikovye hooks, which are subject to intense friction wear of its parts. This, as well as the use of blanks varying thickness, and requires mandatory difficult adjustment. In addition, low effort nip this mechanism leads to the "pulling out" of the province under the semis nip vacuum forming machine.
  5. 5. The system includes a vacuum forming machine controllers block automatic control technology operations vacuum forming products. The automatic mode vacuum molding equipment manually exercised only bookmark semis at the lodgement and renting the finished product. All other operations:
    heating-harvesting,
    - recovery molding table with the format
    The insertion and turning off the vacuum valve,
    cooling-finished product,
    excess air-dome for inflation and for the job with the finished product form,
    - lowering molding table
    implemented vacuum forming machine in a special program that introduces operator.
  6. Rising molding table Thermo vacuum forming machine performed by special air rams with stronger rod, create distortions that hinder, if unevenly distributed load on the plane of the table.
  7. The vacuum forming machine equipped with the high performance cooling fans.
  8. If necessary, vacuum forming machine equipped with a special vent for the Front Loading bulky forms.
  9. The vacuum molding equipment is forming an airtight chamber (poz.3 scheme VFM) to make a preliminary filling of the dome of the polymer sheet to reduce the difference between the wall thickness product.
  10. The vacuum forming machine can be staffed bilateral heaters harvesting.
  11. Panel range of reverting to the mechanism used for a whole field forming vacuum forming machine. In allocated situation heating panel vacuum forming machine shuts off.
  12. In a further integration of fixed optical sensor control level lowering leaf harvesting. The device vacuum forming machine.

The vacuum-molding equipment 2001 2004

 вакуум-формовочная машина

The vacuum forming machine 2400.1400.650 VFM.

TFM type-2

 вакуум-формовочная машина

The vacuum molding machine with automatic protyazhkoy film (line).

TFM type-1

 вакуум-формовочная машина

The vacuum forming machine VFM 700.900.350.

TFM type-1

The vacuum forming machine device.

The vacuum molding machines for the most part arranged differently, and not only different dimensions of its working parts. Similar work is the principle of the equipment. The following is the most common pattern vacuum forming machine:

the device vacuum forming machine Attention! To view the streaming videos in the browser window, you need any flash player, which is the de facto standard Macromedia Flash Pleer . You can download it from the site manufacturer or our site .

The figures marked here:

1. heater vacuum forming machine with adjustable antenna fields harvesting heating (180 mm diskretnost h180mm.)
    2. Clip frame, which compresses harvesting through with a rubber sealing
    3. forming camera;
    4. air cylinder stroke clamping frame;
    5. molding table vacuum forming machines which strengthened Press shape;
    6. air cylinder drive molding table;
    7. authority;
    8. fan cooling finished product;
    9. heater device of abstraction. .

The operating principle of the vacuum forming equipment

is that evenly heated heater seasonal harvesting and compacted with the lodgement forming cells forming vacuum table form a closed-circuit camera from which air is pumped, as a result of which the excess atmospheric pressure heated and deformed ductile harvesting (formalized), in form, molding located on the table.

For more information on technology issues, you can get on the phone +7 (812) 946-35-78

Addresses and contacts of Company MAGISTRAL

OFFICE:Saint Petersburg, Piscarefskii prospectus, house 25, office 1305
Phones: +7 812 718-46-88, 812 946-56-89, 812 946-56-82. Fax: + 7 812 718-46-88
The vacuum - forming equipment: +7 812 946-35-78
Email:e-mail Production1.The Novgorod area,city Pola. street Pionerskaya house.35, the Circuit of travel
2. Leningrad region, Shlisselburg, street A red path, the house 2 (30 km from Saint Petersburg) the Circuit of travel
All circuits of travel Sale of toilet cabins, biotoilets, vann, septiks +7 812 718-46-88
Group
companies
Plastform
[AD]